EMU BLACK

ECUMaster EMU Black Standalone ECU – T-Jet Engine Management Solution

The ECUMaster EMU Black is a class-leading standalone engine management system, designed to control some of the most advanced and demanding engine configurations.

Developed as the successor to the proven ECUMaster EMU platform, the EMU Black incorporates extensive hardware and software improvements based on years of real-world motorsport, tuning and development experience.

It is suitable for a wide range of applications, including:

  • Race and competition vehicles

  • High-performance road cars

The EMU Black can control fuel injection, ignition and multiple auxiliary systems on engines with 1 to 6 cylinders, including applications equipped with:

  • Electronic drive-by-wire throttle

  • Variable valve timing – VVT

  • Boost control

  • Flex-fuel systems

  • Launch control

  • Traction control

  • Anti-lag strategies

  • Water or methanol injection

  • Multiple fuel pumps and cooling systems

It can directly operate up to 6 passive ignition coils, without requiring additional ignition amplifiers or external power modules.

Its advanced drive-by-wire control strategies offer precise electronic throttle management, combined with extensive plausibility, fault detection and safety monitoring functions.

Free firmware upgrades continuously expand the ECU’s capabilities by adding new control strategies, trigger patterns, CAN-Bus data streams and additional features.

 

Complete ECUMaster EMU Black Solution for T-Jet Engines

SLP has developed a complete software solution for the installation and calibration of the ECUMaster EMU Black on Fiat and Abarth 1.4 T-Jet engines.

Customers can purchase the ECU directly through us and receive technical support for selecting the correct components and configuring the system according to their vehicle and performance requirements.

We can provide a ready-developed base calibration, allowing the installation and initial setup process to be completed significantly faster and more efficiently than starting a new standalone ECU project from zero.

The calibration can then be individually adjusted according to the exact engine setup, turbocharger, injectors, fuel system, sensors and intended use of the vehicle.Remote ECU Calibration

Remote calibration is also available for T-Jet vehicles located outside our workshop.

We can remotely configure and calibrate the ECUMaster EMU Black for virtually any level of T-Jet engine upgrade, following prior communication and a complete review of the vehicle specification.

Remote tuning can be provided for:

  • Standard or mildly upgraded T-Jet engines

  • Hybrid turbocharger setups

  • Garrett turbocharger conversions

  • Forged engine builds

  • High-power road vehicles

  • Track, hillclimb and race applications

Each project is evaluated individually, as the final calibration process depends on the vehicle specification, available sensors, fuel system, turbocharger, boost target and supporting modifications.

The Ultimate Engine Management Upgrade for T-Jet Engines

Installing an ECUMaster EMU Black is one of the most complete and effective engine management upgrades available for any T-Jet engine.

Compared with the limitations of the factory ECU, the EMU Black provides an extremely wide range of calibration and configuration possibilities.

This allows the tuner to achieve:

  • More accurate fuel and ignition control

  • Improved boost management

  • More stable engine operation

  • Better throttle response

  • Improved cold-start and idle behaviour

  • Advanced engine protection strategies

  • Individual safety limits based on oil pressure, fuel pressure, temperature, lambda and boost

  • Better control of highly modified or competition engines

  • Data logging and real-time engine monitoring

  • Greater flexibility for future upgrades

The result is not simply more power. It is a more precisely controlled, safer and better-functioning engine package.

Full Factory Instrument Cluster Functionality

When the ECUMaster EMU Black is combined with the compatible Interconnector module, which can also be supplied by SLP, the vehicle can retain normal operation of the factory instrument cluster and original dashboard systems.

Depending on the application and installation configuration, this allows the original vehicle instruments and indications to continue operating normally, including functions such as:

  • Engine speed display

  • Vehicle speed display

  • Coolant temperature indication

  • Warning and information signals

  • Factory dashboard communication

  • Additional original CAN-Bus functions

This provides the advanced control capabilities of a professional standalone ECU without unnecessarily sacrificing the functionality and appearance of the vehicle’s original instrument panel.

For ECU supply, Interconnector availability, installation requirements and remote calibration options, please contact us with the complete specification of your T-Jet vehicle and its current upgrade stage.

SLP tuning

Price
€ 1.048,39
Standar (24%)
€ 251,61
Price (incl. tax)
€ 1.300,00
Availability:
0
SKU:
slp0045

Available Options

Interconnector for Tjet plug & play *

Payment & Security

 


Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Description

GENERAL

Temperature range AECQ100 GRADE2 (-40 to +105˚C)
Reverse battery protection Yes, internal
Operating voltage 6-22V, immunity to transients according to ISO 7637
Enclosure IP 60, custom CNC machined aluminium
Size (mm) and weight(g) 150x72x31, 390
Connectors 1 x 24, 1 x 39 FCI Automotive connector
PC communication USB (with PC client software), serial, CAN

OUTPUTS

Injector outputs 6 protected outputs 5A, low side
Ignition outputs 6 outputs 7A(15A peak) (passive & active coils supported)
Aux outputs 6 protected outputs 5A, low side
Other outputs Full bridge up to 7A, can be used as separate outputs or 2 H-Bridges
WBO heater Protected low side up to 5A
Communication Serial, CAN BUS 2.0B

INPUTS

Analog inputs 9 inputs, resolution 10Bits, 0-5V (protected)
EGT inputs 2 for K-Type thermocouple
Knock sensor 2 inputs
Oxygen sensor LSU 4.2, LSU 4.9 or Narrow band
Trigger inputs 3 (primary, 2 cams) Hall/ VR software selectable
VSS 1 (Hall / VR)
Flex Fuel Sensor Yes
Switch inputs 3 inputs, switched to ground

SENSORS

Temperature sensors IAT, CLT, Oil temperature, AC evap temperature
Pressure sensor MAP, Oil pressure, Fuel pressure (user defined characteristic), AC pressure sensor, Back pressure
Oxygen sensor LSU 4.2 or 4.9 (built in controller), Narrow band, external WBO controllers
Speed Vehicle speed sensor (VR/HALL), Gear sensor (sensor, calculated)

FUELING

Injectors Up to 8 HiZ injectors (sequential)
Injection angle control 0-720 deg, start or end of injections
Battery compensation User defined, wizard for popular injectors
Fueling strategies VE based speed density, Alpha N
Air charge temp. Based on IAT and CLT
VE table 2 tables 16×20 (Load x RPM), resolution of 0.1%
Individual cylinder trim Yes
Staged injection Yes
Additional correction Oxygen sensor corrections, EGT correction (per cylinder), BARO, TPS vs MAP, TPS vs RPM, Warmup, Nitrous, LC, ALS, ASE, Fuel pressure, Knock sensor
Lambda based real time correction Using Lambda target table
Acc. / Deceleration enrichment Yes

IGNITION

Ignition outputs 6 for passive and active coils (software selectable)
Supported triggers N-1, N-2, N-3, N+1, Multitooth, Subaru triggers, Nissan trigger, Lotus Elise, Audi trigger, Renault Clio Wiliams / Alpine, Colt 1.5CZ, Wrangler
Ignition angle table 2 tables 16×20 (Load x RPM), resolution of 0.5 Deg
Per cylinder trim Yes
Dwell time battery compensation Used defined,  wizard for popular coils
Odd fire compatibility Application dependent
Additional correction CLT, IAT, TPS vs MAP, Nitrous,  Idle, Knock sensor, LC, Pit limiter, ALS, Flat shift, Timers, Acc. enrichment

KNOCK SENSING

Channels 2
Resonant frequency range 1-20kHz, 3rd order AAF
Sampling Ignition event driven, knock window
Actions Ignition retard, fuel enrichment, dashboard indication

IDLE CONTROL

Control type PWM solenoids (2,3 wires), drive by wire, stepper motors (bi and unipolar),  ignition cut, fuel cut
Control strategy Open / Close loop , ignition angle control
VE correction Yes, for Alpha-N
Corrections AC clutch, coolant fan, analog input

BOOST CONTROL

Boost ref  and target tables 2 sets 10×10 (TPS vs RPM)
Control strategies Open / Closed loop (PID based)
Corrections Gear, VSS, IAT, EGT

DRIVE BY WIRE

Control strategy Advanced 3D PID + static friction compensation
Supported throttles All with DC motor and current requirement lower than 6.5A

Wizard for 28 popular electronic throttles

PPS to throttle position characteristic 3D table
BLIP support Yes
ALS support Yes

TRACTION CONTROL

TC strategy Delta RPM, gear compensation
Torque reduction Spark cut using 3D table (16×20)
Sensitivity control 10 position rotary switch

VARIABLE VALVE TIMING

Supported systems VVTi, MiVec, VANOS, Double Vanos
Number of camshafts 2
Control strategy PID based closed loop, CAM angle target tables 12×12

FLEX FUEL

Ethanol content measurement Yes
Fuel temperature measurement Yes
Tables blending VE, IGN, Lambda/AFR, Boost, Cranking fuel, ASE, Warmup
Fuel temperature PW correction Yes

SPORT

ALS 2 independent ALS setting, DBW support
Shift light Per gear shift light
Launch control Yes
Gear cut Yes (Open loop), DBW blip supported

Source: Switch, load cell, CAN

Pit limiter Yes
Rolling anti lag Yes

ENGINE PROTECTION

Fail safe values for critical sensors Yes
Dashboard indication of failures Yes, user defined
Over temperature engine protection Yes (oil and coolant), user defined, RPM limit
Low oil pressure protection Yes, user defined, shut off
Fuel pressure protection Yes, fuel dose compensation, RPM limit, engine shut off
High exhaust temperature Alarm, per cylinder fuel trim, boost limit

CAN BUS

CAN standard 2.0B 125, 250, 500, 1000 kbps
Supported CAN Dashes ECUMASTER, Motec M800 Set 1, Haltech E8 E11v2, Pectel SQ 6, AEM
Supported OEM CAN streams BMW E46, Citroen C2, Mazda RX8, Ford ST, Polaris RZR, Mini Cooper R53, Fiat 500, Renault Clio, Lotus, Ford Fiesta, Ford ST, EVO X (AYC support)

OTHER

Unused injection outputs can be used as AUX output Yes
Output functions Fuel pump, coolant fan, parametric outputs, nitrous control, PWM 3D table output,  AC clutch, main relay, speedometer, tachometer
Password protection Yes, 2 levels
Timers Fuel, Ignition, Boost, timers controlled by virtual outputs
Serial dashboard support AIM, RaceTechnology
Autotune Yes
Built in trigger scope Yes
Logging Real time logging to PC computer, logging on external loggers (serial / CAN)