GRT4236 Gen3 / Ball bearing | 220–320 HP

GRT Gen3 Ball Bearing Turbocharger – T-Jet & MultiAir | 220–320 HP

A true OEM+ solution for those who want the feel of a stock turbo — with the performance of a full race setup.


The GRT Gen3 is the latest evolution of our turbocharger range, specifically developed for Fiat/Abarth T-Jet and MultiAir engines. Designed to deliver an excellent balance between fast spool, strong mid-range response and high-rpm airflow, it is an ideal solution for builds targeting approximately 220–320 HP, depending on engine specification, boost pressure, fuel, ECU calibration and supporting modifications.

After more than 10 years of continuous development of the GRT turbocharger series, the Gen3 incorporates our latest improvements in compressor and turbine design, bearing technology, cooling and installation flexibility.

42 mm Billet Compressor Wheel with Extended Tips
The compressor side features a 42 mm billet compressor wheel with an Extended Tips design.

The extended-tip geometry improves the effective aerodynamic area of the compressor wheel, helping it maintain strong airflow while retaining excellent response. The result is a turbocharger capable of delivering the airflow required for higher-power T-Jet and MultiAir applications without sacrificing the low- and mid-range response that makes these engines so enjoyable to drive.

42 mm Turbine Wheel with Extended Tips
On the exhaust side, the GRT Gen3 uses a 42 mm turbine wheel, also featuring Extended Tips technology, combined with an appropriately sized turbine A/R.

This configuration has been developed to provide efficient exhaust-gas flow and reduce unnecessary backpressure while maintaining excellent turbine response.

The objective is simple: fast spool at lower RPM, strong torque delivery and sufficient exhaust-flow capacity at higher engine speeds.

Ball Bearing CHRA
At the heart of the GRT Gen3 is a ball-bearing cartridge, allowing the rotating assembly to operate with extremely low friction.

Compared with a conventional journal-bearing turbocharger, the ball-bearing system offers several important advantages:

Faster transient response and improved spool characteristics
Reduced rotational resistance
Excellent response during throttle transitions
Lower oil-flow requirement compared with conventional journal-bearing systems
Distinctive turbocharger operating sound
Because the bearing system requires significantly less oil flow than a traditional journal-bearing turbocharger, an appropriate oil restrictor is supplied to correctly control the oil supply to the CHRA.

Water-Cooled CHRA
For improved thermal management, the GRT Gen3 features a water-cooled center housing with two coolant connections.

Coolant circulation through the cartridge helps control operating temperatures, particularly after high-load operation, contributing to consistent performance and improved durability.

Internal Wastegate – Adjustable Mechanical Boost
The turbocharger is supplied with an internal wastegate system, making installation considerably simpler and more compact than an external-wastegate configuration.

Different actuator spring options are available, allowing the mechanical/base boost pressure to be configured from approximately 0.7 to 1.0 bar, depending on the requirements of the specific engine and ECU calibration.

T25 Turbine Inlet
The turbine housing uses the widely adopted T25 flange pattern, providing excellent compatibility with a variety of manifold configurations.

A matching T25 gasket is also supplied.

For T-Jet and MultiAir applications, the turbocharger can be installed directly to the factory exhaust manifold using the appropriate adapter, while we can also provide the additional components required to create a complete Plug & Play installation package.

70 mm V-Band Downpipe Connection
The turbine outlet uses a 70 mm V-Band connection, allowing a clean, secure and straightforward connection to the downpipe.

The V-Band design simplifies both installation and fabrication, while the large 70 mm outlet provides sufficient exhaust-flow capacity for the intended power range.

Developed for T-Jet & MultiAir Performance
The GRT Gen3 was created specifically for customers who want significantly more performance from their T-Jet or MultiAir engine without moving to an unnecessarily large turbocharger that compromises response and everyday drivability.

Its combination of a 42 mm billet extended-tip compressor, 42 mm extended-tip turbine, ball-bearing CHRA, water cooling, internal wastegate and optimized turbine housing makes it an extremely versatile solution for both fast road cars and more performance-focused builds.

Key Specifications

- Application: T-Jet & MultiAir engines

- Recommended Power Range: 220–320 HP*

- Compressor Inducer: 42 mm

- Compressor Wheel: Billet, Extended Tips

- Turbine Wheel: 42 mm, Extended Tips

- Bearing System: Ball Bearing

- Cooling: Oil & Water Cooled

- Wastegate: Internal Wastegate

- Available Base Boost: Approx. 0.6–1.0 bar

- Maximum boost: 2.3 bar

- Turbine Inlet: T25 Flange

- Turbine Outlet: 70 mm V-Band

- Generation: GRT Gen3

- Installation: Factory-manifold compatible with appropriate adapter

- Plug & Play Components: Available separately


10+ years of GRT development. One turbocharger engineered around the characteristics of the T-Jet and MultiAir platform.

*Final achievable power depends on engine configuration, fuel system, exhaust, intercooler, ECU calibration, boost pressure and other supporting modifications.

SLP tuning

Price
€ 951,00
Standar (24%)
€ 228,24
Price (incl. tax)
€ 1.179,24
Availability:
0
SKU:
SLP0060

Available Options

Wastegate *
Turbine Housing Heat Management Finish *
Adapter for OEM Exhaust Manifold Installation *

Payment & Security

 


Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Description

Important Notes

  • Some GRT4236 units may include refurbished OEM components.
  • Because each turbocharger is hand-built, minor surface imperfections or visual irregularities may be present — these do not affect performance or reliability.
  • All units are individually tested and inspected by our team prior to shipping.
  • Photos are for reference only; the final product may vary slightly in appearance.
  • Installation must be carried out by qualified technicians.
  • Before the first engine start, the oil circuit must be pre-lubricated to prevent internal bearing or shaft damage.
  • The GRT4236 must not operate above 2,3 bar of boost pressure.
  • The turbo must never run in a system with air leaks, even minor ones, as this can cause overspeeding of the shaft and permanent damage.
  • A 6-month limited warranty is provided, covering manufacturing defects only.
    It does not cover issues caused by:
    • Oil starvation or improper lubrication
    • Overspeed due to boost leaks
    • Foreign objects entering the compressor or turbine housing
  • For complete upgrade packages, including ECU calibration, please contact us via email.
  • The specific turbocharger, like any other aftermarket turbocharger, is not compatible with downpipes designed for different turbo setups.

    For example, if your vehicle was previously equipped with an IHI turbocharger or a Garrett 1446 turbocharger, the existing downpipe will not fit this turbocharger.A new custom downpipe must be fabricated directly on the vehicle, based on the exact turbocharger installation and positioning.

    If you would like us to supply a compatible downpipe as well, this can be provided upon request as a special-order item, manufactured specifically for this turbocharger application.

     

  • Important Compatibility Notice

    The specific turbocharger, like any other aftermarket turbocharger, is not compatible with downpipes designed for different turbocharger setups.

    Likewise, compatibility with existing intake systems cannot be guaranteed. Factory air intake systems, aftermarket induction kits, silicone intake hoses, and other intake components may require modification or replacement depending on the vehicle configuration and turbocharger selected.

    In addition, the turbocharger oil feed line, oil return line, coolant lines (where applicable), boost pipes, and related hardware may also require modification or replacement to ensure proper installation and operation.

    We can supply all required supporting components separately upon request.

    Please note that "plug-and-play" refers only to the turbocharger mounting directly onto the exhaust manifold.

    The surrounding systems and components associated with the turbocharger installation may require adaptation, modification, or replacement to function correctly with this turbocharger configuration.

    For example:

    • Custom downpipe may be required

    • Intake system modifications may be required

    • Oil feed and return lines may require replacement

    • Coolant lines may require modification

    • Charge pipes and boost hoses may require adaptation

    As every vehicle setup is different, we strongly recommend contacting us before purchasing so we can advise on the additional components required for your specific application.

    Our team can provide complete turbo conversion packages tailored to your project requirements.